Epithalon

1. Identification

Product name

Epithalon

Net content

10 mg

Form

lyophilized vial

Identified use

Laboratory research use only, by qualified professionals. Not for human or veterinary use, and not for any form of consumption.

Uses advised against

All human and veterinary use. All food, cosmetic and household use. Any use outside a controlled laboratory setting.

Supplier

emitide, Dubai, United Arab Emirates

Contact

WhatsApp +971 58 511 1441 · contact page

Emergency

This is not a 24-hour emergency number. In an emergency contact your local poison centre or emergency services.

2. Hazard identification

GHS classification: not classified as hazardous on the basis of available data. This is not a statement that the substance is safe — it reflects that the studies needed to classify it have not been carried out.

Signal word: none assigned. Hazard pictograms: none assigned. Hazard statements: none assigned.

Precautionary advice: handle as a substance of unknown toxicity. Avoid raising or breathing dust. Avoid contact with skin, eyes and clothing. Wash hands thoroughly after handling. Do not eat, drink or smoke where this material is handled.

Other hazards: No data available. Not assessed as PBT or vPvB.

3. Composition and information on ingredients

Single-component synthetic peptide preparation unless the product page states a blend. Peptides of this class are typically supplied as acetate or trifluoroacetate salts, so gross powder weight exceeds net peptide content; the net figure on our label and certificate is the peptide mass.

Exact composition and CAS identifiers: see the product page and the lot certificate. Impurity profile is reported per lot by HPLC.

4. First aid measures

General: when in doubt, or if symptoms persist, get medical advice. Show this sheet to the attending physician.

Inhalation: move the person to fresh air and keep them comfortable for breathing. Get medical advice if they feel unwell.

Skin contact: remove contaminated clothing. Wash the affected area with plenty of soap and water. Get medical advice if irritation develops.

Eye contact: rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do. Continue rinsing and get medical advice.

Ingestion: rinse the mouth. Do not induce vomiting. Get medical advice immediately.

Delayed effects: No data available.

5. Firefighting measures

Suitable extinguishing media: water spray, dry chemical, carbon dioxide or alcohol-resistant foam. Use media appropriate to the surrounding fire.

Specific hazards: combustion may produce carbon oxides and nitrogen oxides.

Advice for firefighters: wear self-contained breathing apparatus and full protective equipment.

6. Accidental release measures

Personal precautions: avoid generating dust. Wear gloves, eye protection and a lab coat. Ventilate the area.

Environmental precautions: do not allow the material to enter drains or watercourses.

Containment and cleaning: for a powder, dampen gently to suppress dust and collect mechanically into a labelled, closable container. For a liquid, absorb with inert material. Wipe the area with a damp cloth and dispose of both as laboratory waste.

7. Handling and storage

Handling: handle in a laboratory setting with adequate ventilation, using standard aseptic and good laboratory practice. Do not eat, drink or store food in the handling area. Keep the container closed when not in use.

Storage: store the sealed vial at −20 °C, desiccated and protected from light. Where a product page gives different conditions, that page takes precedence.

Incompatibilities: strong oxidising agents. No data available.

8. Exposure controls and personal protection

Occupational exposure limits: none established for this substance.

Engineering controls: handle powders in a fume hood, powder-weighing enclosure or equivalent local exhaust ventilation. Eyewash and a safety shower should be available.

Personal protection: nitrile gloves; safety glasses or goggles; laboratory coat. Respiratory protection is not normally required where dust is controlled by engineering means; where it is not, use an appropriate particulate respirator.

9. Physical and chemical properties

Appearance

White to off-white lyophilised powder or cake.

Odour

Odourless or faint.

Solubility

Generally soluble in water and in aqueous buffers. Specific solubility: No data available.

pH, melting point, boiling point, flash point, vapour pressure, density, viscosity, partition coefficient, auto-ignition, decomposition temperature, explosive and oxidising properties

No data available.

10. Stability and reactivity

Reactivity: not reactive under normal conditions of storage and handling.

Chemical stability: stable as a lyophilised solid under the storage conditions in section 7. Stability in solution is compound-dependent and is not characterised here.

Conditions to avoid: heat, moisture, light, repeated freeze–thaw cycles.

Hazardous decomposition products: carbon oxides, nitrogen oxides on combustion.

11. Toxicological information

Acute toxicity, skin and eye irritation, sensitisation, mutagenicity, carcinogenicity, reproductive toxicity, STOT and aspiration hazard: No data available.

No toxicological studies have been carried out on this material by us, and we are not aware of a complete published dataset. Treat it as a substance of unknown toxicity and carry out your own risk assessment before use.

12. Ecological information

Toxicity, persistence and degradability, bioaccumulative potential, mobility in soil, PBT and vPvB assessment: No data available.

Do not release to the environment.

13. Disposal considerations

Dispose of contents and container as laboratory chemical waste through a licensed waste contractor, in accordance with local, emirate-level and federal regulations. Do not dispose of down the drain or in domestic waste. Do not reuse empty vials for any other purpose.

14. Transport information

Not known to be classified as dangerous goods under ADR, IMDG or IATA on the basis of available information. This is not a shipping determination for your consignment — confirm classification with your carrier before shipping.

15. Regulatory information

This material is supplied for laboratory research use only. It is not a medicine, food, cosmetic or biocide, and it is not approved for human or veterinary use in any jurisdiction we supply.

The recipient is responsible for confirming that possession, import and use are lawful where they are, and for compliance with any institutional, ethical or licensing requirements that apply to their work.

Chemical safety assessment: not performed.

16. Other information

Revision: 1.0 · generated 27 August 2026.

This sheet is compiled from supplier information and publicly available sources. Where a value is marked “no data available”, that reflects an absence of study data rather than an absence of hazard. It is provided in good faith as a summary of what is and is not known, and is not a substitute for the recipient’s own risk assessment or a guarantee of any property of the material.

Nothing in this document is dosing, reconstitution or administration guidance, and none is available from us in any channel.